- Why Wood?
The spread of the Zika virus within the United States has changed the protocol for exporting shipments to other countries. However, this hasn’t changed the way wood pallets are prepared for export. As described in our previous post, the ISPM 15 requirements exist to prevent the spread of wood-boring insects across international borders. Mosquitos are not wood boring insects. The types of mosquitos that spread the Zika virus breed in pools of water. To prevent the spread of Zika, cargo containers and airplanes are subject to special treatment.
China, in particular, is strict on this rule. According to the American Journal of Transportation, China’s fumigation requirement is effective for all shipments from the US after August 5, 2016. On September 2nd, they modified the requirement to apply only to shipments originating from Florida. Products being shipped don’t have to be exposed to the fumigation process if certain conditions are met. For instance, fumigating the empty container prior to loading the cargo into it is considered acceptable. Another method it to keep the temperature at 15 degrees Celsius or less during transit. Passenger and cargo airplanes must also comply with these regulations. The space in commercial airlines for storing baggage and in the passenger seating areas should be fumigated prior to departure. Airlines must supply proof of fumigation to the Chinese government.
Wood pallet companies that supply pallets for export are not responsible for fumigating cargo containers. Pallet suppliers have no obligation beyond the ISPM 15 requirements to certify the lumber on their pallets has been heat treated. The ISPM 15 requirements pallet companies must follow are intended to prevent the spread of wood-boring insects that could harm forest sustainability. The National Wood Pallet and Container Association has been working closely with the U.S. Department of Agriculture (USDA) on this subject and had determined:
The ZIKA virus is a human health issue and is related to mosquitos, not wood-boring insects. Therefore, the recognized heat treatment or fumigation of export wood pallets for ISPM 15 compliance is not applicable for ZIKA compliance of the shipment. The entire consignment and container must be anti-mosquito treated and certified pre-shipment. There is no action a wood pallet company can do to assure ZIKA compliance for their customer’s shipment. It is the shipper’s responsibility to ensure the entire shipment is ZIKA compliant.
Inbound shipments without proof of anti-mosquito treatment will be fumigated at the port of discharge in China by the authorities without prior notice. It is the Consignee’s responsibility to inform Shipper (at origin) to provide a certificate proof of treatment before loading the shipment.
These regulations are in place to prevent the spread of Zika virus by mosquitos. The Zika virus was discovered in Uganda in 1947 and is common in Africa and Asia. According to the CDC, as of September 14, 2016, in the United States there have been 43 cases of locally acquired Zika and all of them occurred in Florida. Thus, only outgoing shipments originating from Florida going to China are subject to fumigation; however, these requirements are subject to change. As of September 14, 2016, there are 3,132 cases of US citizens who have contracted Zika by means associated with travel.
The International Stands for Phytosanitary Measures No. 15, referred to in the industry as ISPM 15, is an International Phytosanitary Measure developed by the International Plant Protection Convention (IPPC). According to its documentation, the primary goal is to “reduce the risk of introduction and spread of quarantine pests associated with the movement in international trade of wood packaging material made from raw wood.” The language is comprehensive, covering all forms of wood packaging that serve as pathways for pests that could pose a risk to living trees.
The IPPC is a multilateral treaty signed into effect on December 6, 1951. As of 2010, 74 countries participate in the program. According to the IPPC, the “ISPMs provide globally harmonized guidance for countries to minimize pest risk without creating unjustified barriers to trade, ultimately facilitating their exports and imports of plants and plant products.”
In North America, if a wood products company wants to export lumber then they must comply with the program. The most common way for companies to comply with ISPM 15 standards is by heat treating lumber. In order for lumber to meet these standards, the internal temperature of the timber must reach 56 degrees Celsius or 132.8 degrees Fahrenheit for 30 minutes in a kiln. Certain types of lumber, such as plywood, oriented-strand board (OSB), and sawdust are exempt from these standards as they are exposed to the heat-treating requirements during the manufacturing process. The purpose of heat treating lumber to meet ISPM 15 standards is to reduce the risk of spreading wood boring insects.
Wood packaging companies that participate in the ISPM 15 program are assigned a stamp with a unique number and that stamp must be clearly applied to all products used in export. They must keep written logs of incoming heat treated lumber and any outgoing orders where the stamp was used. Compliance is monitored and enforced by third party companies that make unscheduled monthly visits to the wood products companies to ensure all rules and regulations are followed. Some of the largest North American inspection companies are Timber Products, Pacific Lumber Inspection Bureau, and West Coast Lumber Inspection Bureau and they work closely with the United States and Canadian governments. If a wood product company doesn’t follow the rules of the program, they can get their stamp revoked and they won’t be allowed to certify lumber products for export.
Lumber and other wood packaging companies across North America have widely adopted the ISPM 15 standards and these standards are intended to help protect our forests from wood-boring pests. According to ISPM 15 language, “Pests associated with wood packaging material are known to have negative impacts on forest health and biodiversity. Implementation of this standard is considered to reduce significantly the spread of pests and subsequently their negative impacts.” By adopting ISPM-15 protocols into the manufacturing processes and by achieving the high levels of industry compliance, the wood packaging industry will enhance its role as stewards of the resource, reducing the risk of spreading wood-boring insects which results in elevating the sustainability of the products we produce.